Dachshund fidget spinner
by Wotudoin, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
My Daughter loves Dachshunds,so to get with the latest craze I made her a fidget spinner with three Dachshunds on it. I used a ball bearing 22mm dia x 7mm thick x 8mm bore.For the weights I machined 3 pieces of 20mm x 6mm dia brass rounded on both ends then super glued in place.Printed Dachshund standing on its feet with support
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Dachshund fidget spinner by Wotudoin is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Wotudoin a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Wotudoin would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).