Housing for Adafruit Trinket and Maxbotix sonar sensor
by mikeymakesit, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I designed this little housing to support another project. It holds an Adafruit Trinket and Maxbotix MaxSonar sensor. The top screws on with 2.5mm cap head machine screws. I tapped the holes; if you don't tap you'll probably want to use different screws. The hole in the side is for wiring. I'm happy with the outcome and maybe someday it'll save someone else a little time.
Printed in Hatchbox Green PLA.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Housing for Adafruit Trinket and Maxbotix sonar sensor by mikeymakesit is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving mikeymakesit a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure mikeymakesit would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).