TronXY X3 / X3A layer cooler
by leo69, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
There are plenty of print coolers here for the TRONXY X3A but I wanted something that would let me keep the stock metal hot end housing. This will attach to the housing using the current screws. Just need a few short M3 screws to attach a 40mm fan to the blower and an M3x16mm (up to 20mm will work) screw and nut to attach the blower to the mount. Works well for me so far but it's just a blower, no rocket science here:)
Both models will print with no support if placed on bed as shown in the pics. I printed in ABS with 40% infill, no supports. Enjoy!
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
TronXY X3 / X3A layer cooler by leo69 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving leo69 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure leo69 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).