by EMMALabMx, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A remix of Wolvithe's Batman Spinner v2, we only changed the nut size and some minor modifications to fit the bearing.
0.19mm (190 micron)
Low (about 20%)
Material: Z-ABS and Z-Ultrat
Print time: 1 hr. 20 min. (approx.)
We used the pause function in the Z-Suite for Zortrax M200 to print with different colors.
We used a heat gun to remove the white marks from the raft, just be careful, don't over heat your print or it will deform.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Bati Spinner by EMMALabMx is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving EMMALabMx a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure EMMALabMx would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).