DJI Spark Remote Stick Guard

by skyguy76, published

DJI Spark Remote Stick Guard by skyguy76 Jun 21, 2017


Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

8703Views 3140Downloads Found in R/C Vehicles


Stick guard for your DJI Spark remote. Flat disks to stabilize both sticks and a raised center to avoid contact with the buttons. The slot in the center can be used to further secure the guard with a velcro strap. It might be possible to use this for a Mavic remote as well (the distance between the sticks should be the same for both) but I have not personally tested this on a Mavic remote.

Print Settings


Qiditech 1





More from R/C Vehicles

view more

All Apps

Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App

Quickly Scale, Mirror or Cut your 3D Models

App Info Launch App

Fits like a glove, well done !

This fit my Spark controller without any mods or printing adjustments. Nice snug fit on the controller sticks! Thanks for this!

The fit is too tight on my print. Can you enlarge the openings for the sticks 1mm? My Spark controller has rubber donuts on the sticks.

most slicers let you increase the model size.. try printing at 101% or 100.5%. Stop the print early to test so you don't waste much time or filament.

Just thought you should know that it does perfectly fit the Mavic Pro. Great job and thanks for sharing.

Awesome, thanks. I suspected it would fit as I compared it to models designed for the Mavic. I may do a of design tweeks to even further stabilize the sticks but for the time being it's been working quite nicely on my remote.

Printed without supports just fine. 15% infill, 0.2 resolution, works great. Holes were slightly tight, took a file to them and now fits perfect. Thanks.

What were your print settings? Just want to make sure I don't go overkill on layer height or infill.

My infill was 75% with PLA (it could probably be less than that). For layer height I just used the defaults in Simplify3D which says "Primary Layer Height: 0.2000mm." The supports in the center slot can get a little messy but I've printed 3 so far without any issues once I cleaned out the supports.

Ok. Thank you. I am going to print 0.2mm layer height and 50% infill.

Good work. I've been checking daily for someone to draw one up and save me some time.


Yeah me too - got sick of waiting. I probably could've done a better job to design it without the need for supports but it still does the job. Thanks!