3 top and bottom layers with Fast Honeycomb infill. Other infill pattern can be selected. This can hold BQ spool holder with a diameter
is a equivalent reel in size to the one that come with the Creality CR10 printer
In the included files you can find 2 Stl files, 1 gcode file for use only on a Creality CR10 printer (300x300x400) as well as the CR10 simplify3d settings.
Fell free to ask anything you have doubts.
Bill of materials:
->8 M3 x 10 or 12mm Wood bolt Bolt exemple on eBay
->12 8mm (d) X 1,25mm (h) or 6 8mm (d) X 2,5mm (h) Neodymium Magnet eBay link
-> 4 Miniature Barings 5115mm 10 pcs eBay link
->2 of prints of each STL file
After printing place one bearing on each end tower (at the end) place the other part on top with the screw taps up. Screw the four wood screws.
To assemble the Neodymium Magnets I suggest some super glue.