Hypercube Evolution Power Switch Case

by vergienc Jun 26, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

part number for the socket?

It is listed in the summary, but here it is for convenience: AC-04 Black 3 Pin IEC320 C14
250V 10A Plug Outlet

Hi there, saw on facebook you could create one for an other switch.

Is it possible to do one for these if it is not too much trouble. Would be great because I have a couple of these around.


Thank you in advance


Sure, no problem, but based on the webpage I need more information, or confirmation of information. If you have one, please make the measurements and send them over. More specifically, if the drawing is correct, then I need to know the depth. The measurements listed in the specifications section don't match the image with measurements.

Thank you, made some measurements. The depth is from the inside to the end of the cable spade.
You tell me if you need something else

I uploaded the modified file.

Thank you very much. Will give it a try tonight

Great, please post in makes if it works for you.

do you have links to this plug and switch?

Unfortunately, no, since I had these laying around. They are a fairly standard plug and switch.

I would encourage you to measure the parts you have and compare them to the STL if you want to use this design. Or vice versa.