Banjo Dinosaur Head
by ToScH, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is an edit of this thing: http://www.thingiverse.com/thing:200824
I´ve cut it to get a flat bottom and rotated it to achieve nice teeth without support.
The tongue is now fixed to the mouth at both sides to become printable.
There is a simple support for the spikes, but they are still difficult to print.
Now you can print this nice dino without extra support and receive a very nice model with lots of details.
It´s also a good stresstest for your printer.
I´ve printed the dino with 0.1mm layer height and 3 perimeters.
The infill is 20% and there is no extra support.
With this setting it last nearly 12 hours and needs about 13m of 3mm PLA Filament.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Banjo Dinosaur Head by ToScH is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving ToScH a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ToScH would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).