Tea Jar lid
by CobaltGriffon, published
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A modular tea jar lid, fits any jar with a 16 cm opening.
0.2 mm layers
Slice with supports for the arc sections only, the pins and handle don't need any.
Print the following parts:
Arc Section x6
Pin x12 (Optional)
6 M3x15mm screws
Assembly is fairly simple, just print the parts, then use the M3 screws to bolt the arc sections to the handle. If you decide to install the pins, assembly the arc sections into sets of three with superglue or 5-minute epoxy, then glue halves together before installing handle with screws.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Tea Jar lid by CobaltGriffon is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving CobaltGriffon a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure CobaltGriffon would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).