NOTE: If you made this thing, please post some photo's. I would really appreciate it!
This is a fully printable model of the Mammoth Mk. III better know as the Mammoth Tank of the various Command and Conquer games.
The Mammoth Mk. III (GDI designation: Mammoth 27) is a GDI heavy assault tank that entered service prior to the Third Tiberium War. At the time it replaced the Mammoth Mk. II walker as GDI's premier land assault unit.
Also check out the GDI Firehawk:
And GDI Juggernaut:
My son needed a new bedroom, because he will turn 8 soon and was still sleeping in a "Captain Sharky" pirate room. He is a big fan of Command and Conquer 3 - Tiberium Wars. So we decided his next room would be built around the Command and Conquer theme.
After a lot of searching on ebay, aliexpress etc. I could not find any merchandise of these games. So i decided to print something for him. The Mammoth Tank seemed like an excellent choice, being an iconic unit of these games.
I searched a long time for a detailed model that could be printed. No luck.
Until i stumbled upon the model mentioned above. I dissected that model, made it printable and added various details.
All stl files are oriented the way they should be printed.
All stl files fit a 20x20cm printbed.
The final model will be approx. 50 x 25 cm (19.6 x 9.8 in.)
Print without support, in exception of the turret and the various "UpperPart" models (e.g. RearRightTA-UpperPart.stl)
5-15% (i printed everything on 15%, but i think less would work too)
All models not mentioned here should be printed once
Axle - 4
Pin - 3
Trackv2 - 90
Assembling this model should be pretty straightforward. I attached some pictures to show some of the assembling process.
Snap off the added supports and clean up the holes with a 1mm or 1.5mm drill bit
The tracks connect with a piece of 1,75mm filament.
Rear track Assembly (uses M3x20 Allen screws)
Chassis Assembly (Chassisback, Chassisfront, 3x ChassisPin)
Turret Assembly (Turret, TurretDisc, TurretPin)
30-6-2017 - Initial release
7-7-2017 - Added missing turret pin