by Shift31, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Made these to help put a little slack in the wires when utilizing the Z height on the CR-10. I also have plans for a few more control box upgrades. These are designed so you can set the PSU directly on these without any tools. Just line up the rubber feet with the tapered holes in the legs. For the rubber feet I used my go to 1" adhesive cork ones from McMaster Carr.
I reconmend 2-3 shells
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
CR-10 Legs by Shift31 is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Shift31 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Shift31 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).