Zip tie anchor
by PeterEllens, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a simple zip tie anchor
Print as needed.
Thread zip tie threw hole
Stick double sided foam tape to the bottom and attach where needed.
I found this tricky to print. If you use support, the support is really hard to remove from the inside. And I don't think they are possible to print without support.
Is somewhat parametric, but I haven't tried to scale it. I only wanted it in this size. Something for someone else to base their on.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Zip tie anchor by PeterEllens is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving PeterEllens a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure PeterEllens would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).