UPDATE: There is currently as mesh problem for the "Gun, Left, Top" Which means it will not print properly. the muzzle itself will print without much of the details, and be completely flat. Looks weird.
This can be easily fixed by taking the "Gun, Right, Top" And flipping it, until i fix the mesh problem.
Also, for some reason, the measurements I've made for the Chimera connector part is Waaay off. the diameter of the center is good, but the height and length of the wings are, atrocious.
Platform for the turret can be found here:
Whereas the Quad Mortar lay down devastating amounts of firepower upon the enemy infantry, the Quad Cannon shreds anything flying high above the clouds.
This model is meant for use with other vehicles, platforms and what not.
Note: The guns and the Sensor Array can be positioned differently, as they are in an open socket.
It is the first time I've tried using an open socket, so I hope it works well.
I designed this model based on pictures from Warhammer, but added my own feel to it, neither copied directly.
the only measurements that's been taken was the connector part, which was to ensure I could fit these unto my existing Chimeras.
The only reason I even made this, was because I, at 1am in the morning, though that I wanted to field Hydras and Wyverns at the Apoc game, 4 days from now, and didn't want to simply proxy chimeras without turrets.
It took me 4 hours to complete this project, filled with soda, candy, and way too little sleep...