Loading
lichtzeichenanlage

Raspberry Pi3 Model B Case

by lichtzeichenanlage Jul 6, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Comments deleted.

The opening around the power port on the Raspberry Pi 3 Model B V1.2 isn't large enough for the Raspberry Pi Power adapter. Not a great fit for the Raspberry Pi 3 Model B. Clearance around the HMID port looks minimal too which causes problems with some HDMI cables and the audio port is a little larger than the opening which stops the case from closing completely. The logo on top doesn't print very well either and probably should just be knocked out all together or left off.

Hi PDBeal,

I've adjusted the size of the mentioned cut outs by about 2mm and I've added the requested veriations for the logo / ventilation. I haven't printed it jet, but looking forward for your feedback.

Hello PDBeal,

thanks for your comment. As an new bee to 3D printing and design I appreciate feedback very much.

a) I havent used an original Raspberry Pi power cable and the one I used fits quite fine. Could you give me an hind how much clearance is missing?

b) Could you mesaure (or guess) how much clearance your HDMI / audio ports do need?

c) In what direction have you printed the case. What printer and material have you used?. The logo printed just fine for m on my original Prusa i3 MKS2 with and without support. What bridging parameters have you used in your slicer software. I'm printing bridges with 20mm/s to 40mm/s.

If you want I can create to versions of the cut out for the logo. One like it is right now, and one with an complete cut through.