LeopardQR 34x34x42 cm 3D Printer
by shauki, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
With a frame of 500x500x520 mm has a build volume of 340x340x420 mm.
The provided here gantry carriage is only for OpenBuilds VSlot.
Needed only 4 rails of OpenBuilds - the rest can be any cheaper 2020 profiles. Close to Spain this one is perfect.
Take the columns 20 mm longer than the screws to get the max of the vertical travel.
The three screws need to be straight: if one does not roll fine on a flat surface then do not use it: Pure Screw Z Stage
Mount the screws to the lower rails, not like in my photo (to the upper rails).
The file TJoint2020.stl needed if not using slot profiles for the Z stage, otherwise can use regular corner items and save on printing.
The best, IMHO, open source extruder SaintFlint
Except the extruder I print all my printer and robot parts wit a 0.8 nozzle out of PETG and the screenshots of the settings are provided.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
LeopardQR 34x34x42 cm 3D Printer by shauki is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving shauki a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure shauki would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).