This project contains all of the other files for my OSSUM Jeep with 3d printed drivetrain. It requires the full front and rear axle from mrcrankyface. The axles are mounted simply with zip ties. I used a coat hangar as the source material for the steering linkage.
And requires the following assemblies:
The fenders do need to be cut to clear the cab. Future versions of the files will contain final versions of these fenders.
These files require additional hardware to assemble. The body pieces can be assembled using the same kind of hardware as the rest of the OSSUM Jeep (mine came from a big mixed bowl of small nuts/bolts so I have no idea what sizes are needed. oops)
The servo is a "micro" size. Here is where I bought mine.
The servo can be mounted with:
2 M3-10 mm bolts
1 M3 - 6mm bolt
3 M3 - nuts. One is trapped and used to hold the servo mount to the OSSUM Jeep frame. The other two are used to hold the servo.
I mounted the hood with a loop of duct tape.