A compilation of parts to build a Prusa clone based on Tom3D's Dolly build.
Some parts are his customizations, some are Prusa components, and some I either found or customized myself. There is an extruder body with the stepper mounting holes moved over slightly if you are having issues with the stepper hobbed gear lining up with the filament guide whole
I had to shave a bit of clearance on the Y corners so that The bearing holders would slide all the way. Will edit Y corner models in the near future -7/9/2017
Designed some frame braces to be mounted behind the motors utilizing the same screws. -7/11/2017
Original design by Josef Prusa.