by pfreivald, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This stackable tower for the Victor 888 or 884 speed controller can be stacked to any height, and features a PWM clip, strain relief holes for zip ties, and 3/4" of clearance for airflow. Secure the whole thing together with skinny threaded rod for additional robustness.
It can be used for Talons, but if you aren't using the fans, it's rather tall.
To make this tower you'll need, per speed controller:
One bottom mount,
One side stack,
One side stack with clip,
To complete the tower, you'll also need:
One more bottom mount (to serve as the "lid" for swarf protection).
Four bottom connectors (one for the bottom plate, one for the top).
Two connectors for each "story" of your tower.
The tower snaps together, but we highly recommend securing the whole thing with two small threaded rods (which you can also use for mounting).
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Victor Tower by pfreivald is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving pfreivald a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure pfreivald would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).