EDIT : Before printing this thing, I strongly advice having a look to this new design:
I printed the clever design of Sulanix (thanks for this) but I found it a bit flimsy and there were at least 5 mm to win in the design to set the probe closer to the fan in X direction.
Here is an openscad fully parametric remix!
Please modify this line if you want a smaller probe:
probe_diam = 18.5;
I join in the files section my configuration.h for the skynet V2.3.2 firmware.
I found it a bit nervous in terms of acceleration an jerk...
EDIT : I switched to MARLIN firmware which is now natively compatible with ANET. I join the configuration for MARLIN too.
As you may see on the second pictures, the autolevel does pretty good job ;-)
direct print it vertically. It could be printed without support...
going to MARLIN 1.1.4 ...
quite easy :
- download the marlin zip package
- unzip it
- do your business with configuration.h file and don't forget to copy also the configuration-adv.h (to be found in the ANET directory,
- open the marlin.ino from the arduino IDE which is provided inside the skynet package,
- compile and upload
BANG you're under MARLIN !