A small bowl to fill with potpourri. We have a lot of lavender at present, so I'm printing many of these so we can have a little in each room. The design is 60mm diameter at the base and 65mm diameter at the top.
Jasmine .. for printing with 0.6mm nozzle or less
Lavender ... for printing with 1.2 mm nozzle or less
The intention is for this to be printed in spiral vase mode. The image shows an example printed at 0.3mm layer height with 3 initial 100% layers. I left the fan off for this print, to try to achieve reasonable transparency with this HobbyKing clear PLA. Also, this design is specifically designed for an extrusion width of 0.6mm. That is to say that the fluting is 1.2mm wide. A narrower nozzle width will probably also work just fine, but you may encounter issues if you try to print with a wider extrusion.