Well if you Creality CR-10 sitting around with your DJI Spark what can you print? Well how about a landing and hover pad with a level? Came up with this niffy idea when I had to launch from the grass the other day and it end up cutting a little of that grass. So this pad is 11 inchs around and has surface indentations on it to allow the down facing camera something to lock on and I would suggest printing in either orange or blue to again provide an extra level of contrast to the ground cover.
The bubble levels an be found here: http://amzn.to/2u16JAH and by the way they are very hand and seem to end up in many of my projects! Also it just attaches with a little epoxy or glue...
If your looking for DJI Spark accessories, be sure to visit: http://video-drone.diy3dtech.com/dji-spark-accessories/ as we have created a complete curated list of DJI Spark accessories on the market!
Also if you are looking for unique OTG adapters and short cables to connect your iPhone or Android device to your DJI Spark remote also visit: http://video-drone.diy3dtech.com/usb-lightning-and-otg-cables-for-drones/ as we have a complete list of both OTG adapters and cable for the DJI Spark and Mavic!
Also, please follow us on Thingiverse and give this a like if this came in handy and for more information on this project, please visit us at http://www.DIY3DTech.com as well as subscribe to our YouTube Channel at http://YouTube.DIY3DTech.com along with a visit to our drone site and YouTube channel at http://video-drone.DIY3DTech.com
If you are looking for one of a kind swag shop for yourself or a Maker Geek friend, visit our swag shop at http://Swag.DIY3DTech.com for unique 3D Printing, Laser Cutting and CNC swag! Too, if you want a behind the scene look at what we are working on be sure to follow us on Instagram (https://www.instagram.com/diy3dtech/)!
Pretty simple to print as its just one big circle, so set it off and grab yourself a pot of coffee and you should be good to go (from the coffee that is :-)...