Rear Idler Right is BROKEN. Left is fine.
Changed most parts on my printer for the remodelled ones, seems to work great.
Re-modelled in Fusion360 for easier modifications.
Parts I've printed that seem to be 100%:
Parts that I've fitted to my machine:
Export STLs from bodies in Fusion360.
Should be identical or functionally identical, if you find an error somewhere, please let me know.
Only printed the extruder so far, as that is what I was the most unsure about, seems to work great.
Please note that I have not added the 'notches' in the parts, as they are undesirable when using t-nuts, which I am.
E3D Model from
V-Wheel model, 2020 and 2040 profile models from Openbuilds.
No reason to use these STLs unless you plan to modify with them as a base, use the original instead if you just want stock D-Bot.