This is a box customizer with a roller door just like a garage.
You only need to set the width, height and depth of the box and get the files ready to print.
The door has been designed with tolerances in joints but i recommend doing a first test with the 'test.stl' file, a small piece used for calibration.
The door parts can be dissasembled and/or reconnect with others so you can combine different colors in one door or reusing parts for other boxes.
Also included the STL's for the three parts of a 105x105x105 cube box.
Hope you find it useful!
I used 0.3mm resolution for the box, just to save time.
For the door i reccomend 0.15 or 0.2 resolution.
Flex and pull carefully
Make multicolor doors
You need this three parts: box+door`frame
Roll the door over the guides (you may sand the box guides for a smoother roll)
Push the frame.
For stacking many boxes, this is my best solution. It works :)