I wanted a 2 Channel Relay mount for my AM8 so I modified zer0flag's case.
This mount is for the following relay board.
Use M3 screws to mount the relay to the bottom of the case.
I used the same M5 screws listed in the AM8 material list to mount this to the aluminum frame.
Use M2.5 screws for the lid.
I also printed these M5 nuts so I wouldn't need to take the frame apart.
Update 7/13/17: I need to fix the mounting holes for the relay. They are a little off. I will also upload the fusion360 file.
printed with PLA at 200C with heated bead @60C
printing speed was 40mm/s