KingKong 90GT Lipo Tray
by Mike-vom-Mars, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Lipo mount / tray for the KingKong 90GT micro FPV racing quad.
Perfect fit for 2S 850 mAh lipos from Hobbyking ( http://bit.ly/2sR2epi ) which give a flight time of ~7 minutes with the KingKong.
The two small hooks on the opening of the tray can be used to hold a rubber band, so there is no chance to lose the battery during flight maneuvres.
Designed to be printed without supports, so there are no supports needed.
There is a small, thin bridge across one hole on the top of the tray which can be removed after printing. It's just a single, pre-made support for cleaner printing.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
KingKong 90GT Lipo Tray by Mike-vom-Mars is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Mike-vom-Mars a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Mike-vom-Mars would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).