Hot end and parts cooling for the Folgertech Kossel Delta.
-Requires one 40mm fan (stock fan is suitable) for hot end cooling and one or two 30mm fans depending on configuration.
-All holes are set for 3mm screws
Edit: Added two renderings that should help with assembly
This assembly of parts is configurable to offer different options as needed by the end user which I will explain below...
File "MC1" is the physical mount for the stock extruder. This part is mandatory as it is the main support for your hot end and for the hot end cooler (file "MC2").
File "MC2" is the hot end cooling manifold and 40mm fan support. It also serves as the mounting base for the part cooler.
File "MC3" is the part cooling duct and 30mm fan support. You can print either one or two of these as the assembly can be configured to have one or two cooling ducts. If you choose one, it may be mounted on either the left or right side of the hot end cooler for more flexibility of the installation.