So I was a having an issue with the Creality CR-10 pulling over the filament spool especially when it was full into the printer! Yes big ouch so I whiped these up and while one should work, two looks cool so up t you as should you print one and let it be lonely or two so it has company. Also worth note is the size of the of control box isn't perfect (are you surprised) so I made it for 125mm therefore you might find some extra rum between the uprights and the control box so use felt dots like these http://amzn.to/2u13kQ2 or you could also use velcro dots such these too http://amzn.to/2u0YkN1 in order to tighten the fit. In addition this was designed in Open SCAD and the code will be here (http://openscad.diy3dtech.com/creality-cr-10-antitip-bracket/) if you want to modify it.
Wondering how we designed this? Well check the Open SCAD video created over on our Open SCAD Channel: https://youtu.be/APVYF5Qcirs to find out more and if that still isn't enough check us out at our DIY3DTech channel too:https://youtu.be/LcrugZtBiBA
Also, please follow us on Thingiverse and give this a like if this came in handy and for more information on this project, please visit us at http://www.DIY3DTech.com as well as subscribe to our YouTube Channel at http://YouTube.DIY3DTech.com along with a visit to our drone site and YouTube channel at http://video-drone.DIY3DTech.com
If you are looking for one of a kind swag shop for yourself or a Maker Geek friend, visit our swag shop at http://Swag.DIY3DTech.com for unique 3D Printing, Laser Cutting and CNC swag! Too, if you want a behind the scene look at what we are working on be sure to follow us on Instagram (https://www.instagram.com/diy3dtech/)!
Nothing major here just set and print, however these are big (since they are intended for the Creality CR-10) so be aware you will need a 300mm printer to print these.