by mfuse, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Hello, I just created my first model in OpenSCAD that I cobbled together from researching OpenSCAD on the internet.
This is a tv adapter that I wish to be able to print on my 3d printer - after cutting it down to fit. But at the moment I need help getting the holes to go thru the diamond plate. I put the holes in the first cross piece, then duplicated it with no problem. But when I added the diamond plate for support in the middle, the holes filled in. I don't know how to make them go thru the whole model.
Any help would be appreciated.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this Thing
TV Adapter by mfuse is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving mfuse a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure mfuse would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).