Parts cooler that is a front mount for the FT-5 with a titan aero installed (probably will work with any aero cooler).
This will work with the front cross bar in place, and only lose roughly 5mm of build surface in the y axis.. Of course it would work better with it removed and zero build surface lost.
Mount with (4) 3mm screws long enough to mount through the spacer and fan, and thread into the heatsink. The fan duct mounts best with 6/32 machine screws.
Feel free to clean up the stl. I can provide the blender files if needed!
3-5-18: edited the mount's face normals in attempt of making simplify3d render it correctly.
8-4-17: Straightened up the slight tilt the end of the duct had, also added a longer duct for those of you that have your heater block turned perpendicular to how mine is. Test and let me know if it needs to be longer!
Doesnt really matter on settings. just print and go!