Drawer Caddy!

by CallJoe, published

Drawer Caddy! by CallJoe Jul 31, 2017


Design Tools


Use This Project

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

160Views 14Downloads Found in Containers


So there I was late one night, I couldn't sleep so I was watching Infomercials and got bored of them, so went over and was watching Chuck Hellebuyck's channel (CHEP) and he did this thing with a tray that screwed into the front of his workbench and I said "self" that's cool but it requires commitment (i.e. to screw it in) so I said self "there has to be a better way" and in reading down the comments a viewer wrote Chuck saying "Neodymium magnets would be cool" and Chuck said go for it, its on Tinkercad! Well what was Chuck going to say as he already screwed his in :-) right? However it hit me right there in the wee hours of the morning! As I was just grocery shopping with the wife the day before and I always get a 6 pack of Coke Zero and hang it on the side of the cart so why not hang the drawer caddy on the front of the drawer? Bingo, up I sprang out of bed and didn't call Jake from State Farm but logged into Thinkercad and went feverishly to work on the design of a drawer caddy and as Emeril Lagasse would say BAM! Here it is the Drawer Caddy, the ultimate in exo-drawer storage technology and you can have it in your home not tomorrow but with any 200mm x 200mm 3D print today! Yesthat's right TODAY! Wait it gets even better yet if you can believe it, just print it today and you can print a second one (or two) tomorrow for free (well the cost of the filament and such is yours of course but its better than paying extra shipping and handling right? the lawyers made me add that).

Wait! As a special added bonus because your significant other most likely won't let you put that 3D printed stuff in the kitchen. We have a solution for you as there are many finishing options available (at an additional charge of course) should again you (or significant other) not like the 3D printed look (which my wife doesn't) as you can use a stone spray paint such this (http://amzn.to/2ue7gyw) which my wife even approves of or a lighter textured version such as this (http://amzn.to/2uewehx) to cover those nasty layer lines. As YES, with this can magic they will think you spent a fortune on them but it will be our little secret (I won't tell if you don't :-)! So what are you waiting for Christmas (by the way these make great stocking suffers too!). So don't wait, stop reading this and start printing today as you don't want your neighbors (you know the Jones) to have one before you! Don't Delay, download now before they are all gone!

P.S. If you make one, please post a make here on Thingverse to show us your use of this new exo-drawer storage technology in action and who knows we might even pick you yes YOU for our next infomercial! (if we did infomercials). However since we don't, we made this video https://youtu.be/2r9tNFrbN7Q to share more about this handy, dandy little device which is going to take over the kitchens of the world soon! So do yourself a favor and watch it as the Jones are watching it right now and you want to keep with the Jones right?

Also, please follow us on Thingiverse and give this a like if this came in handy and for more information on this project, please visit us at http://www.DIY3DTech.com as well as subscribe to our YouTube Channel at http://YouTube.DIY3DTech.com along with a visit to our drone site and YouTube channel at http://video-drone.DIY3DTech.com

If you are looking for one of a kind swag shop for yourself or a Maker Geek friend, visit our swag shop at http://Swag.DIY3DTech.com for unique 3D Printing, Laser Cutting and CNC swag! Too, if you want a behind the scene look at what we are working on be sure to follow us on Instagram (https://www.instagram.com/diy3dtech/)!

Print Settings


Any 200mm x 200mm printer will work






.3 or better you pick


20% or so...


Easy to print but you must use supports,they pop off easy and its off to the races!

More from Containers

view more

All Apps

Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App

Quickly Scale, Mirror or Cut your 3D Models

App Info Launch App

I wanted mine mounted with screws but yours is a great option.

I am starting to think (TIC) you might own stock in a screw company or your just a "permanent" kind of guy :-) [a little Billy Mays humor]