Raspberry Pi Zero W + Adafruit Joy Bonnet Case
by TinWhiskerz, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Compact case for a Raspberry Pi Zero W + Adafruit Joy Bonnet
Printed using ColorFabb nGen Filament in Red, Yellow, Dark Blue, Light Green and Black
More details about this design and build can be found on my blog here:
100% infill on buttons
20% infill on rest of pieces
Printed case with supports
Rotate the buttons so the largest side is down on the plate
If you are printing with PLA or ABS I suggest using a brim for the case and likely also the lid to help keep them flat. With nGen and a heated bed I didn't need to print with a brim
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Raspberry Pi Zero W + Adafruit Joy Bonnet Case by TinWhiskerz is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving TinWhiskerz a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure TinWhiskerz would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).