In order to build this object you need to print:
2 Keel Hook
8 Hook Lock
4 Rotary Hook
6 Rotary Hook for curtain pipes
Please, print those objects using Pet-G. It is elastic so it "should" resist more than an object printed using ABS Do not use PLA because hot temperature will damage the printed objects.
The structure is composed by different 20mm alluminium pipes. The dimension depends on the boat dimension so it must be evaluated during the setup.
The rotary hooks are built for a 22mm keel pipes so, if your pipes are different you will need to adapt the pipe Screws and bolts are well dimensioned and should be of the required measure.
At the top of the structure pipes should be connected with curve objects not included in this draw. This because you can easelly (and it is cheaper than printing the object on your own) find those objects in any forinuture shop. I used the curve connectors used for the plastic pipes needed as protection for electric cable.
Please note that this draw is only for the structure. The cloth, curtain connections are not part of the draw and should be adapted to your needs and to your dimensions
For more others ideas and objects, please visit: http://www.bvRobotics.com