Simple desktop stand for the TFT Color Touch Screen Weather Station Kit from SQUIX
Modeled after the nice design by Smily77
I also posted the OpenSCAD file, not parametric, but it might be useful to someone who needs to tweek the dimensions a bit.
Prints with no support. I used ABS.
Made a small improvement on 8/10/17 to better secure the base of the display in holder.
Insert base first, rotate top into position, then attach screws.
Does not require support.
Printed with IC3D ABS.
Insert base of display in holder first, then rotate top into position. Attach with two 3mm bolts, 8 to 10 mm long, at the top of the board - finger tight.