Glowing (self-luminous), decorative light bulb.
To be printed with self-luminous (glowing) PLA. Two versions: Self-standing or hanging light bulb.
- Print with self-luminous (glowing) PLA.
- Print it upright (as provided in the .stl file)
- Wall thickness: 0.8mm or more
- No supports
- No infill
- Use raft for best adhesion
- Print with silver PLA (or use chrome effect spray paint afterwards)
- Print the normal socket for a self-standing bulb
- Or print the socket with ring for a hanging bulb
- Recommended infill: ~5%
- Use any glue to stick the socket and the bulb together.
- Use chrome effect or silver spray for the socket, which gives a nice metallic look.