X-Wing damage deck box
by DreiDBV, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a box for sleeved X-Wing damage cards, with a sliding lid. It is modeled after the crates seen on Rebels. The lid lends itself to customization and two-color printing. I have included STL files with the Rebel and Imperial logo. These were made by opening an SVG file in Inkscape, saving as DXF, opening this in Microstation and converting the 2D geometry to a solid, which was then exported to STL and imported in OpenSCAD.
Prints fine at 0.3mm layer height with 2 perimeters and 2 top/bottom layers. Print time is then approx. 2 hours on my printer.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
X-Wing damage deck box by DreiDBV is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving DreiDBV a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure DreiDBV would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).