The latest AVM FritzBox 7590 has the problem that it gets really hot when it is used in horizontal position. Therefore, the manufacturer AVM recommends to mount the FritzBox on a wall in vertical position to get a better air flow. As my FritzBox was planned to be located in a rack, the wall mount was no option and, therefore, I designed this stand.
The FritzBox 7590 has a distance between the mounting holes of 197mm. In addition to using these mounting holes, the stand is designed that the FritzBox also rests with its bottom part on the stand to release forces from the mounting pins.
When printing the stand please consider that PLA gets in trouble above 60°C and a router can really get hot.
The OpenScad model is based on the following library:
The "Fritz!Box" logo on the photos which is upside down is a feature from AVM ;-)