This has been viewed thousands of times, added to TONS of collections, and downloaded hundreds of times. If you appreciate this, please consider a tip ^_^
Added a Rear Cap with text IIP. Trying to get a customizable version, but customizer doesn't allow for importing STLs like I do. You can download the OpenSCAD file yourself to edit it.
This mod keeps your build plate cable from either getting caught behind the printer when it's pulling forward, or from getting caught between the build plate and the back plate of the printer when it's moving all the way back. Mine got stuck ALL the time and would grind the belt every time my printer homed.
Plan to change the text to be more generic, because mine isn't a Wanhao...
I used stock screws for most but I believe that I needed 4 to be a little longer on the base unit and on the rear cap. Just print, unscrew the appropriate stock screws on the back of the printer, arrange the cables (they get a little tight), clip on the rear cap and affix with more screws.
Monoprice Maker Select V2
Don't need a raft if your printer has a good first layer. The rear cap needs supports.
The original file for this is scaled really funny and doesn't import into Simplify3D or Cura very well. To eliminate confusion for first timers, and to remove all the extra bits that came without much explanation, I created this.
I used 123d to scale it appropriately and save it out so that it can be imported easily into Cura or Simplify3D.