I designed glidecam(also on thingiverse) exactly one year ago... it's time for update!!!
I found out its very similar to professional ones.
I promise you will be amazed by results when you will be filming with it.
New one is much better than old one and it's very easy to make it so you must print it !
I'm using STEADY 3 with Canon 700D + Tokina 11-20mm F2.8 + Rode Videomic Pro
New pictures of STEADY 3 SOON !
Designed with: Solidworks
Test video: https://www.youtube.com/watch?v=XxXWUIWGQB0
Assembly guide video: https://youtu.be/UtgZ6No8WYg
If you have any more questions send me e-mail: [email protected]
or contact me on facebook: https://www.facebook.com/primoz.padar
1x - Camera screw 1/4" 17,5mm
1x – M4x30 Screw
1x – M4 Nut
1x – M4 Washer
1x – M8 Threaded rod 55mm
2x – M8 Nut
1x – M8 Washer
4x – Ball bearing(inside diameter: 6mm, outside diameter:13mm, height: 5mm)
1x – Ball bearing(inside diameter: 30mm, outside diameter:55mm, height: 13mm)
2x – M6x20 Screw
1x - M6x50 screw
7x – M6 Nut
2x – M6 Washer
4x – M5x25 Screw
4x – M5 Washer
1x – M8 Nut
4x – M8x30 Screw
4x – M8 Nut
4x – M8 Washer
As many screws, nuts and washers as you need for weight to balance steady
0,5m Aluminium tube(2,5cm)
M8 threaded rod - little bit longer than tube and you shorten it after assembly