Smoke markers fabricated from 3mm MDF. Three-layered, ground-hugging smokers that can be glued together on a 25mm x YYmm base. Pre-prime and paint or assemble and paint later, you choose your technique. A variety pack of "pop-smokes" provided in 2, 3, 4 and 6" lengths. Probably useful across a wide range of games as spell effects, burning hulks, artillery WP/smoke impact markers and naval steam/smoke. Produces plenty of markers per sheet with a minimum 0.5" safety margin around edge of the frame. Can be used in concert with the explosion markers located at https://www.thingiverse.com/thing:2390120
Formatted for cutting on 3mm MDF cut from 24" x 18" (Arch C) sheet, the size that fits across the bed of an Epilog Helix. Minimum standerd 1/2" safety margin. Designed to be printed at 300dpi. I have provided the PDF and a SVG files that I converted online at https://cloudconvert.com/vsd-to-svg. Shared as is.
If you are inclined to be more than a taker and a consumer, pay forward by contributing to this site, as so many others have before you, or perform a random act of kindness, or donate to a good cause when the opportunity next arises. And if you download this, I'd appreciate a LIKE, it helps get the word out and spread these designs around. That is all.