DJI Mavic Controller Mount
by brettkp, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a mount for the DJI Mavic Pro controller to allow it to use the RAM mount system (B size). It should work on the Spark too, but I'm not sure.
The mounting plate is a separate piece which allows for different mounting options if required. The dimensions for the plate if creating your own are:
Outer rectangle: 35.60mm square x 1.4mm thick
Inner rectangle: 29.60mm square x 2.0mm thick
My use case is to use it in Active Track mode whilst cycling, but I haven't tried it out on the bike yet. I'd recommend using a tether just in case it breaks.
Update 29/8/17: I've now included a plate with a GoPro style mount on it. This should work with any GoPro mounting setup.
Update 02/10/17: I've now been able to test the clamp and it worked perfectly (ie it didn't break when used on a road bike!).
Use whatever resolution you prefer. For the plate I've used 0.2mm and for the clamp I've used 0.1mm. I printed mine in PLA+ to allow some flex when inserting the controller. It's a tight fit so if the material is too rigid it's likely to snap.
Remove the supports and file the mounting plate so it will fit in the hole. Glue the plate in and add some foam (or similar) to the top clips to improve the hold and avoid scratching the controller when inserting it.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
DJI Mavic Controller Mount by brettkp is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving brettkp a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure brettkp would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).