This is a Case for the Dreamcatcher and Active PCB Antenna that is portable and can be used for any satellite Angle (0°-90°). The Case is 13.4cm (5,3") tall, 12,4cm (4,8") wide and 2,4cm (1") thin when it is folded down after the Anetnna Cable is removed.
The Dreamcatcher will be glued in with some double sided foam tape to secure it in the Case. After assembling the Antenna holder with two m3 nuts and screws the Anetnna will slide into the solts. The rest of the Antenna can then be covered by the top Antenna Cover.
An Antenna cable can then be used to connect the Antenna to the Dreamcatcher. After that the Dreamcatcher can be protected with the top cover than can be glued to the bottom case with for example hot glue.
What else you Need:
- 2x m3 nuts
- 2x m3 screws
- Glue / Hot glue