by skylarwein, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a 3d design of a Hasselblad that Im planning on making into a pinhole camera.
Print out the camera. Drill a slight hole (1/4\") directly in the center of the lens, put a piece of tinfoil over hole, and poke a tiny hole in that. Or remove the front lens completely, and put a shutter from an old Holga...
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Hasselblad by skylarwein is licensed under the All Rights Reserved license.
What does this mean?
- Remixing or Changing this Thing is not allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving skylarwein a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure skylarwein would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).