Loading
Nerys

Creality CR-10 Cat Plus Giagantic Cookie Jar Cat

by Nerys Aug 26, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

Love this model but would be nice to have the stl files for the body and the head separate so I can slice it with my slicer of choice.

You already have this capacity you just don't realize it :-)

Decide where you would like to print the model 2 after you scale it to whatever size you're able to print on your printer don't worry about Z just worry about X and Y

Now instruct your slicer to stop printing at whatever height you would desire the first piece to be

Then slice it again but this time drop the model into the bed so the virtual slicer bed platform exact same number of millimeters you instructed to print the first part this will print just the head

That's it :-) that's all I did :-) I should make a video on doing that

I made one when I first got my printer to use as a "KITTY BANK". Cut a slot in the back of his head and a hole in the bottom and there you have it.

got printer today and didnt get a cat with mine but wanted to print one. Delighted to find it :)

Started but ran into problem. It printed about 7mm fine, then printer travelled to back of bed and when it continued printing it was off by approx 10mm forward of what it had already done but continuing the body, not that sideways head thing.
Creality hc 10 and cura, sd card ... totally new to this :)
ps the small one

Can you make a small model filled inside ?

Im trying to post a pic but don't seem to be able to post one here. I started printing the body using the gcode but the first layer is showing a spot where it seems it going to be hollow. I know the bodynis hollow but not the bottom layers if that makes sense.

just let it print. that is normal (ie its IN the original file I did a double take too) the very next layer or 2 cover it over.

Thanks. yeah it covered it up. Ill post a pic when done.

It's a seriously long print but the result is worth it and not only that it's actually useful as a cookie jar or whatever

Im going to use it to hide stuff in. :)

Thanks for puting it on thingiverse!

np post pics when you print it!!!

I will. Its in the pipe but I don't have two of the same filament rolls. I might try with one roll..