Loading
mightynozzle

Customizable Plate Bracket for Aluminium Extrusion Profiles (Misumi 2020, 2040, 4040, ...)

by mightynozzle Aug 27, 2017
Download All Files

Thing Apps Enabled

Please Login to Comment

these are a lifesaver!!! thank you very much for your time and effort

Hello my friend. I'm new here and I'm learning. How long is the M5 bolt for aluminum 2020?
Congratulations on the project. Greetings from Brazil.

is it just me or did the customizer not work for anyone?

It hasn't worked since January 5th. So you are not alone. But you can use OpenSCAD instead. Install, open the .scad file and customize. You can download the latest version 2018.01.06 from the Development Snapshot section that has a customizer option, available under Edit > Preferences > Features > customizer.
OpenSCAD has a better preview and is much faster!

I saw that after I made my post.. so I gave it a whirl and it did work but I some how still ended up with a 2020 piece even though I typed in 30. oh well. the bracket worked for testing I guess. was too thick too Thanks for the reply

though I still am seeing a difference in what I "make" in openscad vs what imports into my slicer. like if I make it look like I want, and hit the stl button on openscad, it still outputs all the pieces even though I'm looking at just 1 of the straight pieces

Figured it out, new to openscad... had to render to get it to output what I was actually seeing. On to printing....

Comments deleted.

Thank you for sharing,
I hope to use some time.

https://8020.net/1010.html
The 2020 10 Series is 1-inch (25.4mm) square
and have .256-inch slots

https://8020.net/25-2525.html
The 2025 25 series is 25mm square (they are almost the same as the 10 series)
and have 6.5mm slots.

Hello, is there a re-mix of these for 2020 10 series / 2025 series (i.e. 1-inch/25mm)?

Do have a link where I can check the dimensions?

Both of these are the 1-inch/25mm versions of the 8020 20mm versions.

https://8020.net/1010.html
The 2020 10 Series is 1-inch (25.4mm) square
and have .256-inch slots

https://8020.net/25-2525.html
The 2025 25 series is 25mm square (they are almost the same as the 10 series)
and have 6.5mm slots.

Thanks for the links! I've already implemented the 1inch option for the width in the customizer and I now added the 25mm option for the width of the plate for part # 25-2525.
If you currently can't use the customizer, you can use OpenSCAD to create the brackets.

Just out of curiosity: why not just laser cut these instead of 3d print them?

Feel free to laser cut it. Noboby forces you to print it. You need to modify the scad file a bit to generate svg files. And don't try it with acrylic sheet. This stuff will break. Use aluminium or steel instead.

Any chance you can add in 25.4 as a width? I'm using qubelok for my frame and don't want to go reinventing the wheel just for this :)

As I can see, qubelok is a bit different in profile shape if I compare it to a 2020 profile. Qubelok uses a simple rectangle shape. How do you connect these brackets to this profile? Do want to cut holes in the profile and using screws, washers and nuts?

Yes, pretty much. Holes are pre drilled for attaching everything. Not as easy as using the profile but it's cheap as chips compared to the profile stuff here in Aus.

I've released a new version with 25.4mm width option.

Thanks :) I'll upload some pics when I'm done.

I don't get it, over a thousand likes and not a single comment or "I made one"? You have done an absolutely stellar job of this. Putting up a design for a few brackets would have been good, but a paramaterized version with the scad source file and all the extra options etc? That's going the extra mile. Everyone who uploads to this site should take note: this is how you do a really useful design.

This is very nicely done and makes me want to go buy some Al extrusion, but I don't have closets full of the stuff just sitting around, so it gets a like but I'm not going to print one any time soon. I think most people have the extrusion they used to build their printer and not an inch more.

Silence means consent. I thought so far, at least. But your compliments and your donation raise my expectations two levels higher! :) Double thanks!