Smartphone Tripod Mount
by franpoli, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a tripod mount that will fit most smartphone sizes. The particularity of this model, apart from its aesthetic appearance, is the mechanical properties of its helical body keeping the top clamp in its axis and leveled according to the adjustment wheel.
To put this tripod mount together you will need in addition:
- one M6x60 hex screw
- one M6 hex nut
- one 1/4-20 nut
- some piece of cork or foam
- a super glue to keep the nuts secured in place and to attach the cork or foam
FDM printing recommendations:
For better resistance strength, you should print the helical body standing on the printing bed with support material. However since this piece does not hold the phone, I prefer to print it lying on the printing bed for convenience and smoother result.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Smartphone Tripod Mount by franpoli is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving franpoli a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure franpoli would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).