This is a replacement AV/Power panel for an NES-101 that includes a proprietary Nintendo Multi-out port instead of the regular holes for RF out & channel select. This isn't quite perfect yet. I'm still working on it & will likely be uploading newer versions in the future. If you have suggestions/comments, please let me know!
I haven't uploaded my PCB design files yet. When I do, I'll add a link in here. I decided to move the screw hole off to one side so that the board can't be inserted upside-down so using the db electronics PCB (http://db-electronics.ca/wiki/wikis/projects/snes-av-multi-out/#The_PCB) won't work with this.
You will need to replace the power connector since it is integrated into the original back panel. You can use something like this as a replacement: https://www.digikey.com/product-detail/en/cui-inc/PJ-102BH/CP-102BH-ND/408449
This model is based on the panel from an AV Famicom & the connector dimensions from the db electronics SNES multi-out connector that can be found here: http://db-electronics.ca/wiki/wikis/projects/snes-av-multi-out/
No matter how you turn it, it's going to need supports. If you turn it upside down, you can print it with supports (only supports from the build-plate) for the screw holes that will connect the panel to the motherboard. This is how I've had the most success printing this.