Shooter ready, stand by......
<=== Did I help your reloads? I would appreciate a beer or two lol
Huge ass flared magwell for AR15/M4 rifles, designed for competitve environment where crazy accessories are cool, even cooler if it helps your reloads.
- Flared magwell in a funnel shape for easier magazine insertion.
- Approx. 200% opening area compared to normal magwell.
- 5 degree lower angle to prevent collision to your fingers if you use "beer can grip".
- Cutout section to accommodate aftermarket trigger guards.
- Fits most magazines...... probably, test and verify before use! (Nope, no drums.)
- For use with forged style AR15 lower receiver, modeled after AR-15 Lower, will fit airsoft rifle if the receiver size is same as real ones (Pictured above).
- 2x M3x5mm grub screws required for this magwell to secure, which WILL scratch and/or mar your receiver.
UPDATE: 11 Oct 2018 - I decided to put this on my shapeways store for people who don't own a 3D printer, printed in SLS Nylon will result a virtually indestructable print under normal usage. Color options available but I would suggest ordering white and spray paint your favorite color.
Please be informed I have not printed and tested the SLS nylon version myself.
UPDATE: 12 Oct 2017 - Added "V5 Wedge" version as requested, due to change of screw locations to accommodate the wedges, the main body of original V4 will not fit. You may need longer grub screws (M3x6mm) to engage the dimples inside the wedges.
Please be informed I have not printed and tested this version myself.
At least 3 wall/perimeter and 5 top/bottom layers recommended.
Print bottom part flat against print bed for best result, you may need to rotate model 5 degrees to do so.