by hreedijk, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Printed the UM1 mount last night and found out that there were two bolts at the spool attachment point on my UM :-(
Modified the original file to fit those bolts and uploaded it.
If you printed the first one, you can still mount it to the UM.
Just remove the bolts and screws, attach the UM mount into the wooden plate and screw back the upper screw and bolt.
Made a mount for the UM1 to be able to use the fantastic low friction spool holder from sneakypoo.
This one is for the 608 bearings version and the 8mm rod.
Still have to print this one to test it out.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
UM1 Mount by hreedijk is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving hreedijk a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure hreedijk would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).