1/8" Hose barb clamp for airline tubing.
by T_om, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a small hose clamp made to connect standard 1/8" ID aquarium airline vinyl hose to a 1/8" barb fitting.
I make RC aircraft and do a lot of vacuum bagging. My normal pulls are in the range of about 22 to 24 inches of mercury and the aquarium hose works fine.
This part needs about 75% infill, 2 walls, 3 top and bottom layers. Printed with an ANET A8.
75% or more
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
1/8" Hose barb clamp for airline tubing. by T_om is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving T_om a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure T_om would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).