T4bee Lipo protector
by Ghostface, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is the second part of my lipo mounting system for the T4bee Frame.
It can work standalone and also for other quads since its fully customizable.
On the image you will notice that I have some velcro on the inside of the other part.
This is optionally but usually I put velcro on all my lipos and stick them on my top-mounted quads (in addition to the lipo strap) so thats why.
The strap plate is sized to fit 3s 800-1200mah Lipos but you can resize it in the customizer as you see fit.
Hint: If you print in TPU on glass and upside down with supports you can use the smooth surface as anti-slip mat for your lipos.
For the T4bee frame bottom plate check here: https://www.thingiverse.com/thing:2515491
Printed in TPU/Semiflex, but should also work with any other material
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
T4bee Lipo protector by Ghostface is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Ghostface a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Ghostface would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).